The answer is simple, the boiler was made of overlapping parallel rings with the forward rings within the rearward ones. This shows in the drawing on the HMRS web site (but the on-line version is not of adequate clarity to make the actual dimensions readable).
https://hmrs.org.uk/drawings/0-6-2t-cla ... -axle.html
RR Boiler taper?
-
andrewnummelin
- Posts: 209
- Joined: Tue Dec 17, 2013 9:06 pm
Re: RR Boiler taper?
Regards,
Andrew Nummelin
Andrew Nummelin